XG Series
- 최대출력 용량 : 1.7KW , 1.5KW , 850W
- 정전압, 정전류, 정전력 작동
- 전면,후면 의 출력단  
- OVP , OTP 지원
- USB2.0 , RS-232 , RS-485 지원 / 1U Half Rack

Output Ratings

Model

Output Voltage¹

Output Current²

Output Power³

XG 6-220

6 V

220 A

1320 W

XG 8-187.5

8 V

187.5 A

1500 W

XG 12.5-120

12.5 V

120 A

1500 W

XG 20-76

20 V

76 A

1520 W

XG 30-50

30 V

50 A

1500 W

XG 40-38

40 V

38 A

1520 W

XG 60-25

60 V

25 A

1500 A

XG 80-19

80 V

19 A

1520 A

XG 100-15

100 V

15 A

1500 A

XG 150-10

150 V

10 A

1500 A

XG 300-5

300 V

5 A

1500 A

XG 600-2.6

600 V

2.6 A

1560 A

Line Regulation

Model

Voltage (0.005% of rated
output voltage +2 mV)4

Current (0.01% of rated
output current +2 mA)5

XG 6-220

2.3 mV

24 mA

XG 8-187.5

2.4 mV

20.7 mA

XG 12.5-120

2.62 mV

14 mA

XG 20-76

3.0 mV

9.6 mA

XG 30-50

3.5 mV

7 mA

XG 40-38

4 mV

5.8 mA

XG 60-25

5 mV

4.5 mA

XG 80-19

6 mV

3.9 mA

XG 100-15

7 mV

3.5 mA

XG 150-10

9.5 mV

3 mA

XG 300-5

17 mV

2.5 mA

XG 600-2.6

32 mV

2.26 mA

Load Regulation

Model

Voltage (0.005% of rated
output voltage + 2 mV)6

Current (0.02% of rated
output current +5 mA)7

XG 6-220

2.3 mV

49 mA

XG 8-187.5

2.4 mV

42.5 mA

XG 12.5-120

2.62 mV

29 mA

XG 20-76

3.0 mV

20.2 mA

XG 30-50

3.5 mV

15 mA

XG 40-38

4 mV

12.6 mA

XG 60-25

5 mV

10 mA

XG 80-19

6 mV

8.8 mA

XG 100-15

7 mV

8 mA

XG 150-10

9.5 mV

7 mA

XG 300-5

17 mV

6 mA

XG 600-2.6

32 mV

5.5 mA

Output Ratings

Model

Output Noise (rms, 300 kHz)

Output Ripple
(p-p, 20 MHz)

Voltage

Current8

Voltage

XG 6-220

8 mV

400 mA

50 mV

XG 8-187.5

8 mV

319 mA

50 mV

XG 12.5-120

8 mV

206 mA

50 mV

XG 20-76

8 mV

136 mA

50 mV

XG 30-50

8 mV

120 mA

50 mV

XG 40-38

8 mV

81 mA

50 mV

XG 60-25

8 mV

63 mA

50 mV

XG 80-19

8 mV

45 mA

80 mV

XG 100-15

8 mV

35 mA

80 mV

XG 150-10

10 mV

29 mA

100 mV

XG 300-5

25 mV

18 mA

150 mV

XG 600-2.6

50 mV

11 mA

250 mV

1. Maximum output voltage is guaranteed to be ≤ 0.2% of the rated voltage at zero output setting, using the front panel or digital

remote programming modes.
2. Maximum output current is guaranteed to be ≤ 0.4% of the rated current at zero output setting, using the front panel or digital

 remote programming modes, and when measured with rated load resistance.
3. Total output power is also based on AUX1 Output Voltage (5 V) and AUX1 Output Current (0.5 A) and AUX2 Output Voltage

(15 V) and AUX2 Output Current (0.5 A).
4. From 85–132 Vac or 170–265 Vac, constant load.
5. From 85–132 Vac or 170–265 Vac, constant load.
6. From no load to full load, constant input voltage.
7. For load voltage change, equal to the unit voltage rating, constant input voltage.
8. For 6 V models the current ripple is measured at 2–6 V output voltage and full output current. For all other models,

the current ripple is measured at 10–100% output voltage and full output current.

Output Ratings

Model

Maximum Recommended Remote Sense Line Drop Compensation per Line 9

Up-prog. Response Time, 0~Vmax 10

Efficiency

(100/200 VAC input) 11

XG 6-220

1 V

60 ms

75/77%

XG 8-187.5

1 V

60 ms

77/79%

XG 12.5-120

1 V

60 ms

81/84%

XG 20-76

1.5 V

60 ms

82/85%

XG 30-50

2 V

60 ms

83/86%

XG 40-38

2 V

60 ms

84/88%

XG 60-25

3 V

60 ms

84/88%

XG 80-19

5 V

100 ms

84/88%

XG 100-15

5 V

100 ms

84/88%

XG 150-10

5 V

100 ms

84/88%

XG 300-5

5 V

150 ms

84/88%

XG 600-2.6

5 V

250 ms

84/88%

Output Ratings

Model

Down-prog. Response Time: Full Load

Down-prog. Response Time: No Load

Over-Voltage Trip Point

XG 6-220

50 ms

300 ms

0.5-7.5 V

XG 8-187.5

50 ms

400 ms

0.5-10 V

XG 12.5-120

50 ms

500 ms

1-15 V

XG 20-76

50 ms

600 ms

1-24 V

XG 30-50

50 ms

700 ms

2-36 V

XG 40-38

50 ms

800 ms

2-44 V

XG 60-25

50 ms

900 ms

5-66 V

XG 80-19

80 ms

1000 ms

5-88 V

XG 100-15

100 ms

1200 ms

5-110 V

XG 150-10

150 ms

1800 ms

5-165 V

XG 300-5

150 ms

2200 ms

5-330 V

XG 600-2.6

250 ms

3500 ms

5-660 V

9. When using remote sense, the total of the load voltage and the load line drops must not exceed the rated output of the power supply. For example, for an XG 6-220 in an application with 1 V of load line loss (0.5 V/Line), the maximum available load voltage would be 6-1=5 V. Note: The unit may operate at higher output voltages than this, but there is no guarantee That the power supply will meet performance specifications. Ultimately, the upper limit of the output voltage will be determined by internal circuitry of the power supply (non-adjustable)
10. With rated, resistive load.
11. At 100/200 Vac input voltage and maximum output power. Applies to all footnotes: Programming and Readback: RS-232, RS-485, USB built in. GP1B, Ethernet optional. Specifications are guaranteed from 1% to 100% of the rated output voltage, current, and power.
* Typical

Note: All specifications are subject to change.
AC Line Input Specifications
Rated AC Input Voltage/Frequency 100–240 Vac, 47–63 Hz
Operational AC Input Voltage/Frequency 85–265 Vac continuous, 47–63 Hz, single phase
Input Current (at 100/200 Vac) 23/12 A
Inrush Current (100/200 Vac) Less than: 50 A
Power Factor Correction 0.99@100/200 Vac, rated output power

Programming Mode

 

APG

ISOL

DIGITAL

Voltage & Current Output
Voltage Programming

0-100% 2~up to 10 V, programmable

 

 

Voltage & Current Output
Resistive Programming

0-100% 2~up to 10 kΩ, programmable

 

 

Voltage Output Resistor Programming

0-100% 2~up to 10 kΩ, programmable

 

 

Output Voltage and Current Monitor

0-100% 2~up to 10 V, programmable

 

 

Voltage Programming Accuracy (mV)1

± 0.5% of rated output voltage, max (0-4V/4K range)

 

± 0.1% of rated output voltage

Current Programming Accuracy (mV)1

± 1% of rated output current,
max (0-4V/4K range)

 

± 0.2% of rated output current

Voltage Readback Accuracy (mV)

± 1% of rated output voltage

 

± 0.1% of rated output voltage

Current Readback Accuracy (mV)

± 1% of rated output current

 

± 0.2% of rated output current

Isolation (Prog and Readback Lines)

With respect to chassis potential: 500 V

With respect to:
chassis potential: 600 V
negative or positive main output 1500 V
negative or positive auxiliary output 300 V

 

Voltage and Current
Programming Resolution

 

 

0.012% of full scale

Voltage and Current
Readback Resolution

 

 

 

Parallel Operation

Up to 4 units in master / slave

Up to 4 units in master / slave

Up to 4 units in master / slave

Series Operation

 

Up to 2 units (with external diodes)

Up to 2 units (with external diodes)

Constant Voltage (CV) Constant
Current (CC) Indicator

CV: TTL High (4-5 V)
CC TTL Low (0-0.6 V)

 

 

Shutdown Control 2

 

Logic low 0.0 - 1.4 V
Logic high 2.0 - 15 V
Dry contact compatible

 

AUX On/Off Control

 

TTL level or dry contact compatible

 

Power Supply Status Signal

 

TTL high: OK (4-5 V)
TTL low: fail (0-0.6 V)

 

Interlock Enable/Disable

 

Dry contact. Open/Short: On or
Off programmable

 

1. Typical APG or isolated APG accuracy can be improved to max accuracy by user calibration at the specific range selected
2. The shutdown input has user selectable negative logic operation via front panel or remote digital input/output

Note: All specifications are subject to change.
Output Performance Specifications
Temperature Coefficient 100 PPM/° C from rated output voltage, after a 30-minute warm-up*
Drift (8 hours) 0.05% of rated output voltage & current over an 8 hour interval with constant line, load & temperature, after a 30-minute warm-up
Hold-up Time Typical 20 ms at any rated input line.
Transient Response Time 13 Less than 1 ms for 6 V to 60 V models. Less than 2 ms for 80 V to 600 V models*
Meter Accuracy 0.5% ± 1 count
Aux output 3 +5 V: +0.4 V, – 0.5 V at 0.4 A
+15 V: +1.2 V, – 1.4 V at 0.4 A
Isolation 12 1500Vac or 2121Vdc between mains terminals and accessible conductive parts / chassis ground.
Output to chassis 500Vac.
Environmental Specifications (Indoor use)
Operating Temperature Range 32°F to 122°F, 100% load (0°C to 50°C)
Storage Temperature Range -4°F to 158°F (–20° C to 70°C)
Operating Humidity Range 30–90% RH (no condensation)
Storage Humidity Range 10–95% RH (no condensation)
Operating Altitude Up to 6,500 feet (2,000 m)
Installation Category II (IEC 1010-1)
Pollution Degree 2 (IEC 1010-1)
Mechanical Specifications
XG 1700 Watt (W×H×D) 16.8 x 1.7 x 19.0 inch (429 x 43.6 x 483 mm without rack mount ears)
Weight 22 lb (10 kg)
Cooling Forced air cooling by internal fans
Regulatory Approvals
Safety
 CSA 22.2 No. 61010-1, 60950-1-07 and UL61010-1, UL60950-1-(2nd Ed) 12. Marked with cCSAus, CE for EMC & low voltage directive
EMC Complies with EN61326-1
Complies with EN55022, Class B, FCC Part 15B for conducted emissions
Complies with EN55022, Class A, FCC Part 15A for radiated emissions
Complies with EN61000-4 series of standards for immunity

* Typical
1. Time for the output voltage to recover within 0.05% at its rated output for a load change 10-90% of rated ouput current. Output set point 10-100%
2. Double insulation on primary to secondary isolation barriers. Basic insulation primary to protective earth ground.
3. Current: 0.51 A minimum guaranteed, 0.72 A typically available. Overcurrent protection (each output) is automatic, non-latching. When OCP is tripped the aux voltage folds back and will recover to nominal condition
when the over current condition is removed (typ. <0.2A). To protect external circuits attached to the aux outputs it is recommended that customers use an appropriately rated fuse in series with the aux outputs set point 10-100%

Note: All specifications are subject to change.