Common |
Switching Frequency |
XFR 2.8 kW: Nominal 31 kHz (62 kHz output ripple); 60 V to 600 V models: nominal 62.5 kHz (125 kHz output ripple). |
Time Delay |
7 sec maximum from power on until output stable |
Voltage Mode Transient Response Time |
< 3 ms for output voltage to recover within 0.5% of its rated voltage after a step change in load current of up to 10% to 90% of rated output |
Maximum Voltage Differential |
±600 Vdc from output to safety ground |
Remote Start/Stop and Interlock |
2.5-15 V signal or TTL-compatible input, selectable logic |
Remote Analog Programming |
Voltage and current programming inputs (source must be isolated): 0-5 k, 0-10 k resistances; 0-5 V, 0-10 V (default) voltage sources |
Remote Analog Monitoring |
Voltage and current monitor outputs 0-5 V, 0-10 V (default) ranges for 0-100% of output |
Remote Programming & Monitoring Accuracy |
1% zero to full scale output for the default range |
Maximum Remote Sense Line Drop Compensation |
5 V / line (Line drop is subtracted from total voltage available at supply output.) |
Front Panel Voltage and Current Control |
10-turn voltage and current potentiometers |
Front Panel Voltage Control Resolution |
0.02% of maximum voltage |
Main Output Connector |
XFR 2.8 kW: 7.5 - 100 V models: nickel-plated copper bus bars with bus bar cover and strain relief; 150V to 600 V models: 4-terminal, wire clamp connector with cover and strain relief |
Approvals |
NRTL approved and CE-marked to UL Std. No. 61010-1, CAN/CSA-C22.2 No. 61010-1-04, EN 610101-1 (Equipment Class I, Pollution Degree 2, Installation Category II) Meets USA EMC standard: FCC, part 15B, Class A; Meets Canadian EMC standard: ICES-001, Class A. |